Here's what our company is doing to keep our customers and employees safe amid concerns of COVID-19. Learn More.
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Indianapolis System

A nice benefit of getting your security system hooked up by professionals is that you hardly ever have to concern yourself with it. However, there may be a few instances when you need to reset your alarms in Indianapolis. If you use the ADT Command panel, resetting typically needs only one or two button tap following occurrences like battery changes, power outages, and false alarms.

Read The Instruction Manual Before Resetting Your Alarm

A word to the wise before you begin to reset your Indianapolis home security system, check your instruction manual prior to proceeding. You’ll never want to undermine your home’s protection because you hit a button in error. In addition, the process could change if you upgraded from a number pad to a fully digital system. And if you’re struggling to reset your system, don't be reluctant to contact the experts.

Resetting Your Indianapolis Security System Due To A False Alarm

Generally, a false alarm occurs due to an accidentally tripped sensor. You can engage the control panel or access your ADT smartphone app and hit the shield image and enter your credentials to switch off the system for these instances. You might receive notification from your security monitoring team, but just let them know you had a false alarm.

Tips To Reset Your Alarm When Experiencing A Power Outage In Indianapolis

When you lose power because of a storm or other event, you might start to hear a steady beep from your central command hub. This lets you know that the alarm is running off the battery backup. To reset your unit and halt the constant chirping, you should take steps to disarm and rearm your security.

However, if power is out for a longer period of time, you might need a total reset of your home’s security. Heed the instructions in the manual -- normally by entering your PIN number and tapping the designated button two times -- and you should be back in business. You may continue to notice chirps from the backup power, as it might not end until your battery is fully charged. Call your home security agent if you keep having difficulties with your ADT equipment a day after the power is resumed.

Reset Your Home Security System After Switching Out A Battery

Occasionally you must replace a battery within one of your home security components. In order to accomplish this, you want to change your home’s defense to test mode so you prevent setting off an accidental alarm. Once the battery is replaced, change the alarm out of "Test Mode" and resume your usual settings. If the system fails to notice the piece of equipment or the battery light stays on, you may have to perform a whole system reset.

Resetting Your Indianapolis Security System Following The Addition Or Deletion Of A User

Adding and deleting users can be done on the ADT Command panel and your ADT smartphone app. You shouldn't need a reset of your alarm after adding or removing codes. With that being said, if you move into a new home already equipped with an ADT system, you should reach out to your security specialists at (317) 268-5461 to start a new plan. The technician will come out and upgrade outdated parts, set up more components (as required), and do a factory reset.

A User-Friendly Security System Is The Right Choice

Attempting to reset a home security system in Indianapolis will likely be frustrating if it fails to include understandable instructions and features. If you’re ready to get your intuitive alarm system, dial (317) 268-5461 or send in the form below. Our specialists are ready to customize the perfect security system for your residence.